How is parquet laid?

In every home, it is important that the flooring is of high quality and durable. When choosing parquet flooring, you should know what it is. It is made of parquet boards glued very tightly along the entire length of the edges. In order to absorb any thermal expansion, it should not rest tightly against the walls during installation, but a joint should be left between them, which should be about 8 millimeters wide.

When installing this type of flooring, it is desirable to apply the glue in a continuous strip along the entire length of the grooves. You will know that the glue is sufficient when it comes out evenly along the length of the joint. After that, the board itself is placed and pressed against the previous one with light taps through a small supporting block. For a nice flooring that is free of any joints, it is necessary that the glued boards are strongly pressed against each other until the glue sets completely. There are various factory devices. You can also choose quality laminate flooring, in which the installation becomes much easier and faster, both by a professional and by yourself, if you wish.

In the case of parquet, after the planks have hardened, glue will come out, which must be quickly cleaned with a damp and then a dry cloth so that they do not leave traces of it on the floor. When there are edges near door openings or when transitioning from one type of flooring to another, they need to be protected with special decorative metal strips. Such strips are available on the market in an extremely wide range. If you have a fireplace in the room where you are laying parquet, the joints between the parquet and the tiles around the fireplace can be filled with silicone rubber paste colored according to the color of the parquet. This way, everything will visually be in tone and style. When purchasing parquet planks, they will be sold to you in packages.

Other things you should buy from there are wood glue, a hammer, a good jigsaw, as well as devices for tightening the already glued boards, also a wooden pad, which is to protect the edges of the boards when tapping on them and special wooden wedges and a pencil to make notes with. It is good to make a list so that you do not forget anything when you are in the store. For the installation of parquet you do not need quality concrete products , or heavy metal structures, do not worry when you have such a repair and installation of parquet, everything is done quickly and mostly cleanly. If you prefer models that look like noble wood, there are parquet boards that have a melamine coating and imitate all types completely professionally.

During the installation itself, the first row of boards should be placed parallel to the wall, using a ruler or tied string to arrange the boards in it so that the edges lie in a completely straight line. Next, wedges are placed from the wall and a joint is necessarily left. You can also place an entire parquet board, which you then remove instead of wedges. The end joints in each coming row must be offset relative to the end joints in the previous row. This is achieved by cutting the first board in the row. Then, glue is placed on each board not only on the tongues, but also in the grooves, to obtain a firmly glued and moisture-proof block. Where pipes for the heating installation pass, it is good to make a slit in the boards.

The cutting line is drawn on the back of the board itself, this is done with a jigsaw. When the flooring is ready, wait about 24 hours for the glue to fully harden. Then all the wedges are removed and the skirting boards are placed. Parquet is a mosaic for decorating the floor. You can choose the color picture on your floor that represents a classic symbol, the choice is yours.