Where to start with tiles?

Are you planning to renovate your bathroom or the floor in another room? If so, it is a good idea to help yourself by simply planning in advance the placement of the tiles you want and be sure that this will save you a lot of time and may even prevent any unwanted complications at a later stage of your renovation. It is difficult to choose the right ones. But it is good to take into account that with ceramic coatings, the symmetry of the laid tiles is considered aesthetically necessary.

You know that the rooms themselves have cracks and their sizes are never exactly the same as the sizes of the tiles. This in turn requires cutting the tiles at the edges or corners, generally where it is needed and if you are not experienced in this, you can break it, so it is good to take a little more when buying, and also anticipate marriage. There is a wide selection of bathroom tiles in the store , or for the kitchen, you just need to choose a color and measure the room well, how many squares you will need. It is good to start laying from the places where you planned to lay the whole tiles, this is how many masters have been practicing in recent years, leaving the places where the cut pieces will be laid for the end. Do not think that they will be done quickly, on the contrary, they take more time.

In cases where you need to cut a little in half, it is advisable to determine the middle of the tiled surface with the help of a line. The goal is to form stripes along the walls and joints, where everything looks even. It is good to see and decide exactly what level the tiling will reach. This is where you start with a whole tile from top to bottom, so that the cuts fall at the bottom.

In cases where such a level is not present, start with a whole tile from the bottom and finish with a whole tile from the top. When deciding to have the tiles reach the ceiling, a little trick is to let the cut tiles border it by starting with a whole tile from the bottom to the ceiling. After you have glued everything, the choice of mixers comes, and all kinds of cabinets and accessories stores, with which a room acquires complete completion.

Choosing the tiles themselves is not easy, given the rich varieties, and if you have stopped at combining 2 tile colors, it will be of great benefit to you if you start laying the whole tiles from the point of the division itself in an upward direction and then back down. This is recommended if the ceilings are not straight or properly leveled, so you will benefit by ending with a decorative frieze, which will have the main and important purpose of covering irregularities and defects. Your first step is to determine the point from which you will start, falling to you in height, and then in width.

The goal is to start with whole tiles on the most visible side of the wall, and to leave the cut pieces as the final touches. It is important to choose good joints that match the choice of tiles, and even if there are combined colors, the joint should be the same. They absorb the stresses caused by linear movements, preventing cracking and even unwanted destruction of the coating. You can choose their width, which depends on the number and size of the covered area. It is also good to use elastic grouting mixtures, which are even mandatory. If you are wondering how to achieve the same size joints, special joints are also sold, with which you can adjust everything. Don't forget; one thing, in the end the bathroom is for you and you decide how it should look.